Zerotech Vengeance 1-6X24 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

INSTRUCTION MANUAL

ZEROTECH RIFLESCOPES

vengeance

(MODEL 1-6X24)

Table of Contents

Summary of Contents for Zerotech Vengeance 1-6X24

Page 1 INSTRUCTION MANUAL ZEROTECH RIFLESCOPES vengeance (MODEL 1-6X24)
Page 2 ‘ANY OWNER, ANY PROBLEM, ALWAYS COVERED’...
Page 3: Table Of Contents
LIFETIME WARRANTY SCOPE FEATURES SETTING THE DIOPTRE MOUNTING YOUR SCOPE ZEROING YOUR RIFLE RESETTING THE TURRETS AFTER ZEROING RETICLE ILLUMINATION FEATURE BATTERY INSTALLATION SCOPE CARE RETICLES WARRANTY & CONTACT INFORMATION BULLET DROP DETAILS ZEROTECH INFORMATION ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 4: Introduction
Customer First - We listened to you and came up with a family of riflescopes that will satisfy the needs of our most discerning and experienced customers. Backed by Experience - ZeroTech enjoys 55 years of experience in the Optics Market supplying high quality brands to retailers throughout Australia and the Asia Pacific.
Page 5: Lifetime Warranty
- No receipt or warranty card is required. - We will repair or replace product with equal or similar value and/or specifications. ‘ANY OWNER, ANY PROBLEM, - We will return product to you at no charge. ALWAYS COVERED’ ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 6: Scope Features
SCOPE FEATURES VENGEANCE 1-6X24 Magnification Elevation turret cap Dioptre lock ring throw lever Elevation turret Windage turret Ocular Windage turret cap 30mm maintube Magnification power change ring Reticle illumination adjustment dial Illumination battery cover Objective ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 7: Setting The Dioptre
Adjust the magnification to 1x. Whilst looking through the scope at an object between 15 to 50 metres away, rotate the ocular - Loosen the until the object appears at true 1x magnification. dioptre locking ring ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 8 - Set magnification to 1 X - Rotate ocular to achieve true 1 X image - Set magnification to 6 X. Confirm reticle is sharp and crisp - Tighten dioptre locking ring ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 9: Mounting Your Scope
If the scope does not slide freely, lapping of the rings may be necessary to avoid damage to the scope maintube. ZeroTech always recommends the use of high quality rings and bases ZEROTECH - INSTRUCTION MANUAL...
Page 10 22–25 in lbs or 2.5–2.8NM. ZeroTech highly recommends the use of a scope level (bubble level) fitted to the rings or the scope maintube to ensure the reticle can consistently be aligned with the fall of gravity every time a shot is fired.
Page 11: Zeroing Your Rifle
If you have a low magnification scope, such as the Vengeance 1-6x24, you may wish to zero your rifle at a closer distance.
Page 12 Once you are satisfied that the scope and the bore of your rifle are aligned to the same point on the target, fire a shot at the target and observe the point of impact (bullet hole). ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 13 7-8mm at 50 metres (0.25” at 50 yards). � If your scope turrets are indexed in 0.1 Milrad (0.1 MRAD), each ‘click’ of your scope turret will adjust your bullet impact 1cm at 100 metres (0.36” at 100 yards). ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 14: Resetting The Turrets After Zeroing
Re-fit the turret and and double check the turret is in the ‘0’ ensure the ‘0’ is position. indexed with the vertical index mark Repeat this process for the windage turret. on the main tube ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 15: Reticle Illumination Feature
RETICLE ILLUMINATION FEATURE Vengeance 1-6x24 models are equipped with a reticle illumination feature. Before use, you will need to remove the illumination dial battery cap and discard the plastic circuit blocker. The CR2032 button battery can then be reinstalled and the illumination dial battery cap refitted.
Page 16: Scope Care
SCOPE CARE REMOVING THE ILLUMINATION BATTERY COVER Insert battery here ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 17 Wipe dust and debris from your scope body using a damp microfibre cleaning cloth. If necessary, clean dust and dirt from the scope lenses using a lens brush and the ZeroTech lens cleaning cloth. Never spray cleaners or solvents on any part of your scope. Irreversible damage may be caused by such products.
Page 18: Reticles
RETICLES Your new Vengeance 1-6x24 riflescope comes fitted with a reticle designed in-house by ZeroTech. ZeroTech scopes feature a range of different reticles, designed specifially to help you maximise your shooting experience. For further information visit the Reticles page on our zerotech.com.au/reticles...
Page 19: Warranty & Contact Information
WARRANTY & CONTACT INFORMATION Please direct all enquiries to service@zerotech.com.au Company details; For global partners scan ZEROTECH INTERNATIONAL PTY LTD the QR code below. Ph: +612 9938 3244 Email: sales@zerotech.com.au Address: PO BOX 7200, Warringah Mall, NSW, 2100 AUSTRALIA zerotech.com.au/global-partners ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int.
Page 20: Bullet Drop Details
ELEVATION DISTANCE 100m 325m 500m 150m 350m 525m 200m 375m 550m 225m 400m 575m 250m 425m 600m 275m 450m 625m 300m 475m 650m * BC = BALLISTIC COEFFICIENT ** H.O.B. = HEIGHT OVER BORE ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 21: Zerotech Information
ZEROTECH INFORMATION For more information on ZeroTech products please visit our websites: Australian website US website zerotech.com.au zerotechoptics.com ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 22 NOTES ZEROTECH - INSTRUCTION MANUAL VG1624-IR_V1_int. 10/2021...
Page 23 www.zerotech.com.au...
Page 24 ‘ANY OWNER, ANY PROBLEM, ALWAYS COVERED’ www.zerotech.com.au ZERO-TECH 2021 I Printed in China l Specifications subject to change without notice...