Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Linuo ETG19B
Summary of Contents for Linuo ETG19B
- Page 1 ETG19B Freeze RF cavitation inport system User manual...
- Page 2 WARNING Dear user： Thanks for using our company's products, in order to fully make use of the products, we sincerely suggests follow: ◆◆Please read this instruction in detail, and keep it well for further reading and consulting. ◆◆Please follow the instruction to fit and operate the machine correctly. ◆◆Please do not remove and change any accessories of the machine.
- Page 3 Parts Introduction 1.LCD touch screen 2.Cool&heat hammer socket 1 Inlet 4.Cool&heat hammer socket 2 5.Cool&heat hammer socket 3 6.Overflow Coolant discharge valve 8.Induction electrode socket ipolar RF work head for eyes socket 10.8 polar RF work head for body socket General power switch Power supply line outlet Coolant level window...
- Page 4 Transportation & Installation Before transportation: The coolant should be cleared before transportation. Method: pen the coolant discharge valve[7] (turn anticlockwise and fasten the pull out the stopper), discharge the coolant, shake the machine to help the coolant get out completely. Add coolant steps Connect power supply line[12], turn on general power (Fig1)
- Page 5 (3)Click “8-polar RF” to enter interface as (Fig 5) shows. (4)Click “Cool&heat hammer” to enter interface as (Fig 6). (5)Click “ ” to enter interface as (Fig 2) shows. (1)In interface as (Fig 2) ,Click “Basic setting” to select language. (2)“Advanced setting”...
- Page 6 3.Adjust output intensity, the range is 1(weak) to10(strong). 4.Clean the parts and applied gel on fleshy parts(eg. abdomen, hip, thigh) .The amount depends on moving flexibility of work head. If there is much fat, you can increase the output intensity. Click “||” , the system begin to work.
- Page 7 5.Apply medium on treated part, (Heat therapy may use gel or essential oil; Cool therapy may use antifreeze product).Heating the skin up to promote the activity of local blood, reduce the comfortlessness of the cool treatment. 6.Put induction electrode around arm or leg. Click “||” ,the system begin to work. Beautician hold the hammer to move slowly on skin, in circle or beeline repeatedly.
- Page 8 Maintenance 1.Appliances and medical equipment close to the equipment may be resulting in operational failure due to Interference. 2.Prohibit use of the equipment in the following environment ―Hot and humid environment ―Dusty environment ―Environmental with much smoke or stream 3.If there comes a failure, please shut down the power immediately, and send it to the distributor or manufacturer for maintenance.
Need help?
Do you have a question about the ETG19B and is the answer not in the manual?
Questions and answers