Download Print this page

FCC AU210GYGG Manual page 8

Advertisement

Infotainment system
Sound settings: You can change
the settings related to sounds,
such as location where sound will
be concentrated and the output
level for each range.
- Position: Select a location
where sound will be concen -
trated in the vehicle. Select
Fade (Fader) or Balance, turn
the [TUNE] knob to select the
desired position, and then press
the knob. To set sound to be
centred in the vehicle, select
Centre (Center).
- Equaliser (Tone): Adjust the
output level for each sound
tone mode.
- Speed dependent vol.: Set the
volume to be adjusted auto -
matically according to your
driving speed.
NOTICE
Depending on vehicle models or
specifications, available options
may vary.
Depending on the system or
amplifier specifications applied to
your vehicle, available options
may vary.
1
10
Mode popup: Set to display mode
selection window when the
[AUDIO] button is pressed on the
control panel.
Date/Time: You can change the
date and time that are shown on
the system display.
- Set date: Set date to display on
the system display.
- Set time: Set time to display on
the system display.
- Time format: Select to display
time in the 12 hour format or
the 24 hour format.
- Display (Power Off): Set to dis -
play the clock when the system
power is off.
Language: You can change the
display language.
Radio

Advertisement

loading