Toro WiFi-LoRa TEMPUS-AG-WF User Manual page 4

Toro TEMPUS-AG-WF
TEMPUS-AG-PR
TEMPUS-AG-4G
TEMPUS-AG-CT
TEMPUS-AG-WF
TEMPUS-AG-MS
TEMPUS-AG-MV
Select the TEMPUS-AG-
WF icon from the devices
list
Enter the password for the WiFi network access point, then confirm.
To check that your TEMPUS-AG-WF is correctly connected to the WiFi network, check that the LED on the front
panel is solid green.
Step 3
PAIRING
Association between a TEMPUS-AG device (CT/MS/PR/MV) and the TEMPUS-AG-WF:
You must first have associated your TEMPUS-AG device with your account in MyToroTempus application before
proceeding with the association of the device on your TEMPUS-AG-WF gateway. Refer to the device user
manual to associate it and then perform the following step.
TEMPUS-AG-WF TEMPUS-AG CT4
TEMPUS-AG S1 TEMPUS-AG S4
4
SELECT A TEMP-AG-WF CONTROLLER
TEMPUS-AG-WF
Select the required TEMPUS-AG-WF
to be installed from
the list of the available devices
1. Select the product in the
list of devices.
(Remember that you must be
connected to your device via
Bluetooth®).
Note: To identify your
TEMPUS-AG-WF among
the nearby WF gateways,
please refer to the
«Default name» present
on its product label."
Select the WiFi network access
to which you want to connect
your TEMPUS-AG-WF by clicking
on the corresponding line or
«Ignore» if your TEMPUS-AG-WF
has already been assigned to a
WiFi network.
Push on on the top
right of the screen to
access to information of
the products.
(Example refers to
TEMPUS-AG-CT)