Table of Contents
Advertisement
Preparation
Assembly
To assemble device:
1 . Remove the sleeve .
2 . Remove the tab from the new battery .
3 . Place battery in device by lining up the battery's "+" sign
(flat side of the battery) with the "+" on the case . The "+" sign is
on the wider end of the device, which is engraved with SoundGear .
4 . Insert device back into sleeve making sure the SoundGear label is
visible . The narrow end of the device should rest against the tip
of the sleeve .
8
8
Preparation
1
2
3
4
9
9
Advertisement
Table of Contents
