SLC Device Installation
4.4
Addressing SK-Minimon SLC Devices
All SK-Minimon devices are addressed using the two rotary dials that appear on the
device board. Use the ONES rotary dial to set the ones place in a one or two digit
number, and use the TENS rotary dial to set the tens place in a two digit number.
SK-Minimon modules can be assigned any unique address from 1 to 48.
Example 1: To select device address 10, turn the ONES rotary dial to 0 and the
TENS rotary dial to 1 as shown in Figure 4-4.
Example 2: To select device address 42, turn the ONES rotary dial to 2 and the
TENS rotary dial to 4 as show in Figure 4-4.
Example 1: Device set to 10
Example 2: Device Set to 42
Figure 4-4 SK-Minimon SLC Device Addressing using Rotary Dials
54711
4-5