D-Link Air Xpert DWL-AG650 Manual page 14

Configuration Utility
Link Info
Status: Displays the
MAC Address of the
Access Point that is
associated with the
DWL-AG650.
SSID: The Service
Set Identifier is the
name assigned to
the wireless
network. The factory
SSID setting is set
to default.
Frequency: The
DWL-AG650 is a tri-
mode, dualband wireless Cardbus adapter. In this instance 802.11b indicates
that the DWL-AG650 is communicating in the 2.4GHz band.
Wireless Mode: Either Infrastructure or Ad-Hoc will be displayed here.
Encryption: You can see if WEP is enabled or disabled here
TxRate: The default setting is Auto; TxRate settings are automatically
determined by the DWL-AG650 depending on the distance from the access
point at this default setting.
Channel: Displays the channel information. By default, the channel is set to
Auto and selection is automatically determined by the DWL-AG650.
Signal Strength: The Signal Strength represents the wireless signal
between the access point and the DWL-AG650. The percentage coincides
with the graphical bar.
Packet Count: Displays the statistics of data packets transmitted and
received.
default
14