View Battery Backup Information; Information - CyberPower PowerPanel Power Supply System User Manual

Status: Displays the present operating status of the Battery Backup.
•
Normal: The system status is normal.
o
*Fault: The system is in fault state due to an internal malfunction.
o
*Overheat: The temperature exceeds the normal temperature
o
threshold.
Unknown: This is an abnormal status.
o
*Temperature: The present internal operating temperature of the Battery
•
Backup case.

View Battery Backup Information

Information

The Battery Backup Information page shows a summary of information about
the Battery Backup as follows:
UPS Model: The model name of the Battery Backup.
•
Hardware Version: The hardware version of the Battery Backup.
•
*Serial Number: The serial number of the Battery Backup.
•
UPS Type: The type of the Battery Backup. It may be 「On Line」 or 「Line
•
Interactive」.
V.A: The Volt-Amp specification of the Battery Backup.
•
Power: The maximum power supplied by the Battery Backup (Watts).
•
*Maximum Current: The maximum output current of the Battery Backup
•
(Amps).
Voltage: The output voltage of the Battery Backup (Volts).
•
*Frequency: The output frequency of the Battery Backup (Hz).
•
Battery Replacement Date: The date that the batteries were last replaced.
•
The normal lifetime of the batteries is 3 years. You can click "reset" button
to configure the replaced date. The replaced date only can be configured to
the date before the day while you are configuring it.
*Standalone Outlets: The number of standalone outlets.
•
*External Batteries: The number of external battery cabinets.
•
*: These details may not be available on all models.
Copyright © 2006-2007 Cyber Power Systems, Inc. All rights reserved.
®
PowerPanel Business Edition
6