Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal. However, If you've
connected another component to your TV(such as a VCR) using the Video/Audio input, you will
want to be able to view the signal from the component.
To do this, you will need to switch from the ' TV ' input to the ' Line1, Line2 ' Input, as follows:
1 With the TV on, press the MENU button twice, then " Set-Up " menu will appear.
2 Use the WCHV buttons to select " Input ".
3 Press the CVOLB buttons to change from ' TV ' to ' Line1, Line 2 '.
4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.
CM27101S
3-2
Set-Up
Language :
Input :
Select
Adjust
CM25101S
12
Chapter 3: Operating Your TV
2
Set-Up
Language :
Reception :
Memorize Channels
Add/Delete Channels
Input :
English
Line2
Next
2
Set-Up
Language :
Reception :
Memorize Channels
Add/Delete Channels
Input :
Select
English
Air
TV
Select
Adjust
Next
English
Air
TV
Adjust
Next
3-1
Set-Up
Language :
English
Input :
Line1
Select
Adjust
Next
3
Set-Up
Language :
English
Input :
Line
Select
Adjust
Next