Table of Contents
Advertisement
C H A P T E R
Operating Your TV
Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batter-
ies in the remote, you are ready to use the TV. The first thing you should do is to program your TV
so it memorizes all of available channels.
Turning Your TV On
Programming Your TV's Channel Memory
Your TV's memory determines the channels that are available using the WCHV buttons. If a chan-
nel is not in memory, you can tune to it with the number buttons, but not with the WCHV buttons.
Follow these steps to program your TV's memory:
1 With the TV on, press the MENU button twice, then the "Set-Up" menu will appear.
2 Use the WCHV buttons to select "Reception", then use the CVOLB buttons to select 'Air' or
'Cable'. If you connected an antenna to your TV, select 'Air'; If you connected a cable system,
select 'Cable'.
3 Use the WCHV buttons to select "Memorize Channels", then use the CVOLB buttons to enter
the "Memorize Channels" process.
4 Press the MENU button to return to Set-Up menu.
5 Press the MENU button four times to return to normal TV viewing.
Your TV's channel memory will not be affected by a power outage. You will not need to re-program
the memory unless you change the type of cable or antenna connected to your TV.
3-2
Memorize Channels
Memorizing all air channels.
Please, stand by.
Press MENU to cancel and
return to Set-Up menu.
3
1 To turn your TV on, press the POWER button on the remote control. You
can also use the POWER button on the front panel. Make sure your TV is
plugged in before you try to turn it on.
2
Set-Up
Language :
Reception :
Memorize Channels
Add/Delete Channels
Input :
4
Set-Up
Air 11
Language :
Reception :
Memorize Channels
Add/Delete Channels
Input :
English
Air
TV
Select
Adjust
Next
English
Air
TV
Select
Adjust
Next
3-1
Set-Up
Language :
Reception :
Memorize Channels
Add/Delete Channels
Input :
Select
Adjust
5
Chapter 3: Operating Your TV
English
Air
TV
Next
9
Hide quick links:
Advertisement
Table of Contents
