Advertisement
+
-
Daylight Sensor
Charlotte Black Solar
104416/104417
Installation
1. Loosen the screws on the bottom of luminaire and take the baseplate out.
2. Install the baseplate on the concrete as shown below.
3. Fix the luminaire on the baseplate by screws.
1
Cautions
1. Please install this solar LED Lamp at the places exposed to the sunlight directly, no shelter.
2. If the LED light start to continuously flashing, it indicates that the unit is low on power and need to be recharged.
3. Please do not change anything of solar panel or battery.
4. Please understand that the working time will be effected when sunshine is not enough(Rainly, Cloudy).
Radar
Motion Sensor
2
3
Advertisement
Table of Contents
Related Manuals for Qazqa Charlotte Black Solar 104416
Summary of Contents for Qazqa Charlotte Black Solar 104416
- Page 1 Radar Daylight Sensor Motion Sensor Charlotte Black Solar 104416/104417 Installation 1. Loosen the screws on the bottom of luminaire and take the baseplate out. 2. Install the baseplate on the concrete as shown below. 3. Fix the luminaire on the baseplate by screws. Cautions 1.
- Page 2 Radar Daylight Sensor Motion Sensor Charlotte Black Solar 104416/104417 Optional Functions & Features 1.Future - Proof Design, The solar panel + LED Module is replaceable after working lifetime. No need to replace the whole luminaire, save cost. 2.Security Lighting Option: After 30 seconds without human movement detected, the light will be turned down to 20% brightness automatically(Default setting) 3.Complete Off Option: After 30 seconds without human movement detected, it will be turned off automatically(This option need to take the solar panel out and press the switch...
Need help?
Do you have a question about the Charlotte Black Solar 104416 and is the answer not in the manual?
Questions and answers