Page 2
TO Prevent fire or shock hazard, do not use this plug with an extension cord, receptacle or add other outlet unless the blades can be can be fully inserted to prevent blade exposure. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The lightning flash with arro- whead symbol,within an equ- ilateral triangle is intented to...
• Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/ or humid or moist areas.
• The unit is shipped with a dummy CD display card in the CD player. This dummy CD card must be removed before you can use the CD player. Connect each speaker to the corresponding speaker jack on the back panel of the main unit.
PROTECT YOUR FURNITURE This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’...
Page 7
LOCATION OF CONTROLS STANDBY Button REMOTE Sensor PROGRAM Button LCD Display CD REPEAT Button Radio Dial Scale FUNCTION Selector HEADPHONES Socket RADIO BAND Selector 10. CASSETTE Compartment 11. CASSETTE keys RECORD, PLAY , FAST REWIND, FAST FORWARD, STOP / EJECT, PAUSE 12.
Remove the stereo carefully from the box, retaining the packaging for future use. Read these instructions carefully before use. CONNECTIONS Before switching on your stereo system, be sure that it is connected as follows: SPEAKERS Connect the speakers to the speaker sockets on the back of the music system. Connect the left speaker to the left speaker socket and the right speaker to the right speaker socket.
Smaller, 3” discs, may also be used with this CD player. To load additional CD's press the DISC button to rotate the CD tray. Up to 3 discs can be placed in the tray at any one time.
The CD player will skip back one track each time the Button is pressed once in the middle of a track, the CD player will skip back to the beginning of that track. To make it skip back to the previous track press the Button twice.
Notes: & disc play starts. In this case the number of the selected track will be displayed until the Play/Pause Button is pressed. To skip to the next disc simply press the DISC SKIP Button. The unit will cycle through position 1 - 2 - 3 - 1 - 2 ..etc If the REPEAT Button is pressed during normal or programmed disc play the following repeat functions are displayed in sequence in the CD Display.
LISTENING TO PROGRAMMED TRACKS Program your selection of tracks by following the procedure shown above. Press the PLAY/PAUSE Button. Disc play will start at the beginning of the first programmed track. TO CLEAR THE PROGRAMMED MEMORY If the disc is playing, press the STOP Button. Press the STOP Button again.
Page 13
COPYRIGHT NOTICE WARNING Most records, compact discs, audio and video cassettes, radio and television broadcasts contain material which is subject to copyright laws. It is unlawful to record such material in any form whatsoever, whether on disc or tape, without the permission of the copyright owner concerned.
STANDBY Button STOP Button PLAY / PAUSE Button CD SKIP Buttons PROGRAM Button DISC SKIP Button MUTE Button VOLUME UP/DOWN Buttons. BATTERY INSTALLATION Insert 2 R03S (AAA or equivalent) size batteries into the battery compartment of the remote control and replace the cover (Batteries are not included). BATTERY REPLACEMENT When the batteries become too weak, the operating distance of the remote control is greatly reduced and you will need to replace the batteries.
Two common causes of trouble experienced when using cassettes are:— Tape jamming - Leading to uneven speed in playback, and Tape tangling - Where the tape wraps itself around vital parts of the mechanism. To reduce the likelihood of these problems occurring, the following precautions should be observed.
Electronic products of this kind should never be subjected to extreme temperatures or high humidity. For instance, this set should not be placed in bathing areas or around stoves and radiators. If necessary, clean the unit with a piece of cloth dampened with water only (Be sure the AC Power Cord is disconnected from the Mains).
Radio Frequency Coverage Recording System Recording System: Erasing System: General Speaker Impedance Headphones: CD Player Pick Up: Encoding: Due to continuing improvements, the features and design are subject to change without notice. SPECIFICATIONS 120V ~ 60 Hz 88 - 108 MHz...