Troubleshooting; Important Safety Information - SACKit Light 200 User Manual

Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING

If you have trouble operating your SACKit Light 200 lamp, please try the following solutions . If the
following solutions do not solve your problem, please contact our customer service at info@sackit . d k for
further support .
There is no light when I turn on my SACKit Light 200
• Please check if the lamp has run out of power . If the lamp has run out, charge the battery pack for
about 8 hours for a full charge .
My SACKit Light 200 flashes
• Please check if the lamp has run out of power . If the lamp has run out, charge the SACKit Light 200 for
about 8 hours for a full charge .
I cannot charge/turn on my SACKit Light 200
• Please make sure that the adapter and the charging cable is connected correctly .
• Please check the power adapter voltage and current demand .

IMPORTANT SAFETY INFORMATION

Please read and follow the following instructions to ensure that you use the SACKit Light 200 lamp safely
and correctly . Product damage caused by use contrary to the following information is not covered by the
warranty .
Warning
To prevent any fires or electrical hazards please act according to the following guidelines:
• Do not disassemble or replace any parts of this device . Please contact professional maintenance or a
qualified service center if there is any damage to the device.
• Before the product is connected to a power supply socket, please ensure that the voltage of the power
supply and the battery pack matches . If the voltage does not match, do not connect the battery pack
to the power socket .
• Never charge the battery pack in or near water!
• Do not place the lamp too close to excessive heat or fire (such as a fireplace). However, the lamp can
withstand up to 60 ° C and can withstand direct sunlight .
• The operating temperature of the lamp is between -20°C to 60°C .
• The charging temperature of the battery pack should be between 10 °C to 45 °C .
• This lamp is IP67 tight . This means it is dustproof and that it can be placed fully under water for a
short period of time .
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Light 200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents