How To Close Sackit Light 250; Troubleshooting - SACKit Light 250 User Manual

HOW TO CLOSE SACKIT LIGHT 250

The lamp can only be closed by placing the two buttons (G) and (H) one above the other . The handle is
pressed down, then screwed in clockwise and is locked when a click is heard .

TROUBLESHOOTING

If you have trouble operating your SACKit Light 250 lamp, please try the following solutions . If the
following solutions do not solve your problem, please contact our customer service at info@sackit . d k for
further support .
There is no light when I turn on my SACKit Light 250
• Please check if the lamp has run out of power . If the lamp has run out, charge the battery pack for
about 10 hours for a full charge .
My SACKit Light 250 flashes
• Please check if the battery pack is placed correctly . If necessary, remove the battery pack from the
lampshade and then replace it .
• Please check if the lamp has run out of power . If the lamp has run out, charge the battery pack for
about 10 hours for a full charge .
I cannot charge/turn on my SACKit Light 250
• Please make sure that the adapter and the charging cable is connected correctly .
• Please check the power adapter voltage and current demand .
G
H
8