Advertisement
6. If the KEEP WARM function has been
selected, the KEEP WARM button surround
will remain illuminated in red, the selected
temperature button surround will remain
illuminated in white, and the kettle will
maintain the desired setting for 20 minutes.
7. If further heating of the kettle is not
required, switch Off at the power outlet,
unplug the power cord and empty the water
from the kettle. Replace the kettle onto the
power base and close the lid.
NOTE
The default temperature setting of the kettle
when switched On at the power outlet is 100°.
- When the kettle is switched Off at the
power outlet and switched back On, it will
automatically default to the 100° temperature
setting.
- When the kettle remains switched on at
the power outlet and different temperature
settings have been selected, the kettle will
default to the last selected temperature
setting.
NOTE
This kettle must be used only
with the power base supplied. Use caution
when pouring water from your kettle, as boiling
/ heated water and steam will scald. Do not
pour the water too quickly.
NOTE
Always fill the kettle to between the minimum
(MIN 500) and maximum (MAX 1700)
marks on the water window on the kettle.
Filling above the maximum mark on the water
window of the kettle may result in boiling/
heated water splashing from the kettle.
12
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device, which
protects against overheating should the
appliance be operated with insufficient water.
If this occurs the kettle will stop heating.
Switch Off at the power point and allow kettle
to cool before refilling. The safety device will
automatically reset when the kettle has cooled
down.
Advertisement
