Troubleshooting; Cleaning And Care - Kalorik TKG VT 2000 Operating Instructions Manual

Cleaning the surface
Clean the fan with a duster or a soft wet cloth.
Do not use chemical solvents (such as benzene, alcohol or gasoline) as
they may cause irreversible damage. Make sure no water enters the control panel
or fan motor
Do not run the unit until completely dry.
Place the fan in its original box or cover the fan to
protect it from dust. Store it in a cool dry place.

TROUBLESHOOTING

Do not repair or disassemble the unit by yourself, unauthorized repair
attempts will invalidate the warranty and may cause bodily harm.
Issue Possible Reason
No power 1. Power cord is unconnected
2. There is no
power from
socket 3. The
power switch
Odour 1. New unit. When the unit is
is not on.
emission used for the first time the fan
from unit motor
odour
Strong within a week of use 1. Fan is not
vibrations used on a flat
and noise surface 2. Fan
may be
damaged
If the above solutions do not resolve the problem please contact the service
centre.

CLEANING AND CARE

NOTE: Always disconnect the power supply cable from the power supply before carrying out
any cleaning operation.
•
To remove dirt from the plastic surfaces, use a soft damp cloth.
•
Do not use any of the following agents as a cleaner: gasoline, thinners or benzene
• Never immerse the fan in water or any other liquid. Make sure no water enters the
control panel or fan motor.
• Do not run the unit until completely dry.
•
When storing your fan in the off-season it is important to keep it in a safe dry location. It
is important to protect the fan head from any dust. We strongly recommend using the
original box, when storing the fan away.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EU
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
may produce
which will dissipate
7
Solution
1. Connect the power cord
2. Check socket is turned on
3. Turn the unit on
1. No action required
and
1. Place on a flat surface. May put
an anti-vibration mat underneath
2. If fan is damaged discontinue
use and contact service centre.
TKG VT 2000 190320