Panasonic AJ8 Series Instructions Manual page 4

AJ8 Switches with Trip Function Upgraded Type (AJ8R)
DIMENSIONS
The CAD data of the products with a "CAD" mark can be downloaded from our Website.
CAD
CAD
2-pole, single throw (ON-OFF)
32.0
6.35
15.0
29.8±0.3
Suitable connector: CT connector
＋
Notes) 1: The external dimensions and mounting dimensions for the 1-pole,
single throw type and the 1-pole, double throw type are the same as those for the 2-pole,
single throw type indicated above.
2: The figures show the 2-pole, single throw (ON-OFF) type as an example.
The contact terminals are 1, 2, 3, and 4.
In the case of the 1-pole, single throw (ON-OFF) type, the contact terminals are 1 and 2.
In the case of the 1-pole, double throw (ON-ON) type, the contact terminals are 1, 2, and 4.
There are no other terminals. Refer to the internal wiring diagram.
3: The coil is a polarized coil; coil terminal 5 is positive and coil terminal 6 is negative.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
External dimensions
25.0
22.0
0
－0.2
19.7
φ 1.75
(11.3)
18.3
21.7±0.25
Opening radius
Edge
The opening radius from when
the panel was processed should
be on the front side of the panel
General tolerance: ±0.5
0.8
Note: Please contact us if you are considering using a
ー 4 ー Panasonic Corporation 2021
Wiring diagram
(Bottom view)
1-pole, single throw (ON-OFF)
ON (set): 1-2 closed
1-pole, double throw (ON-ON)
Reset: 1-4 closed
Set : 1-2 closed
2-pole, single throw (ON-OFF)
ON (set): 1-2 closed
3-4 closed
Diagram of recommended
panel mounting holes
X
Max. R0.1
Panel thickness (T) X
1 to less than 1.8 30.4
0
-0.1
1.8 or more to 2.3 31.1
0
-0.1
panel of other than the recommended size and
shape.
AECTB30E 202110
Unit: mm
Y
22.0
+0.1
0
22.0
+0.1
0