Advertisement
2.System Requirement and Installation
This device must be applied on USB specification products. And user should to confirm
that PC operation supports USB function, USB 1.1 or 2.0.
No external driver installed：
OS Support ：Win98SE, WinME, Win2000, WinXP, Mac OS 9.0 and 10.1
System recommended：use Intel
At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and WinXP)
For good sound quality, please adjust your system's H/W acceleration and Sample
rate conversion quality to Full and Best.
Note: Some USB Host Controller may have problem with data stream package loss,
this will influence output audio data and make some discontinuous sound. But
this is very rare.
Sometime, when user plug USB speaker on PC system and OS cannot auto
change audio device to USB audio, please switch the audio device to USB
audio sound and audio devices properties in control panel.
PII 350 MHz or AMD
3
K6 450 above
Advertisement
