Table of Contents
Advertisement
HS-34W_en1_with_FCC_Notice.fm Page 11 Tuesday, January 10, 2006 4:22 PM
■ Listen to music
When you switch on the headset, it tries to connect to a music player
with which you have paired it.
When the headset is connected to a phone but not to a music player, the
headset can only be used to make and receive calls if your phone does
not have a compatible music player feature.
The available music functions depend on your music player.
If you receive or make the call while listening to the music player, the
music is muted until you end the call.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
To play music, select a track on your music player, or press the track
forward or track reverse button on your headset to select the track. To
start playing, briefly press the multifunction button.
To pause playing, briefly press the multifunction button. To resume
playing, press the multifunction button.
To move to the next track, briefly press the track forward button
repeatedly. To move to the previous track, briefly press the track reverse
button twice.
■ Clear the settings or reset the headset
To clear the pairing and volume settings, switch off the headset, and
press the multifunction and track forward buttons at the same time for
about 10 seconds.
If the headset stops functioning, although it has been charged, you need
to reset it. Gently press and hold the reset button (see page 5) with an
unfolded paper clip (or another small object without a sharp tip) for 10
seconds. The reset does not clear your pairing and volume settings.
B a s i c u s e
11
Advertisement
Table of Contents
