Download Print this page
AGM SPARKELEC ST19 Quick Start Manual

AGM SPARKELEC ST19 Quick Start Manual

Infrared motion sensor

Advertisement

Quick Links

SPARKELEC ST19
MANUAL OVERRIDE
LANX Australis Infrared Motion Sensor!
The LXS2000 is a unique Infrared Motion Sensor that utilizes a carefully integrated circuit to
detect infrared energy. The Sensor includes USER FRIENDLY functions.
IP66
SPECIFICATION:
Power Source: 220-240V/AC
Power Frequency: 50/60Hz
Time Delay: Min.10sec±3sec
Max.30min±2min
Rated Load: Max.2000W
1000W
LED 150w MAX
Detection Moving Speed: 0.6-1.5m/s
FUNCTION :
Can identify day and night: The consumer can adjust working state in different ambient light.
It can work in the daytime and at night when it is adjusted on the "sun" position (max). It can
work in the ambient light less than 3LUX when it is adjusted on the "3" position (min). As for
the adjustment pattern, please refer to the testing pattern.
SENS adjustable: It can be adjusted according to using location. The detection distance of
high sensitivity could be 18m max.
Time-Delay is added continually: When it receives the second induction signals within the
first induction, it will restart to time from the moment.
MANUAL OVERRIDE FUNCTION:
1. Sensor mode → Stay on
Now switch wall switch OFF-ON, OFF-ON twice within 3seconds. The sensor will now hold your
light ON continuously just likes a normal light.
2. Stay on → Sensor mode(The following either method is ok)
1).Switch your wall switch OFF, then switch ON after 0.3seconds.
2). If the light left ON (not change the sensor to sensor mode by hand), the sensor itself will also
automatically return to the sensor mode after 8hours.
Good Sensitivity
INSTALLATION ADVICE:
As the detector responds to changes in temperature, avoid the following situations:
Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors
etc.
Avoid mounting the detector near heat sources, such as heating vents, air conditioning
Detection Range: 120°
Detection Distance: 6-18m(<24℃)(adjustable)
Ambient Light: <3-2000LUX
Working Temperature: -20~+40℃
Working Humidity: <93%RH
Power Consumption: approx 0.5W
Installation Height: 1.8-2.5m
Poor Sensitivity

Advertisement

loading
Need help?

Need help?

Do you have a question about the SPARKELEC ST19 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for AGM SPARKELEC ST19

  • Page 1 SPECIFICATION: Detection Range: 120° Power Source: 220-240V/AC SPARKELEC ST19 Power Frequency: 50/60Hz Detection Distance: 6-18m(<24℃)(adjustable) Time Delay: Min.10sec±3sec Ambient Light: <3-2000LUX Working Temperature: -20~+40℃ Max.30min±2min Working Humidity: <93%RH Rated Load: Max.2000W Power Consumption: approx 0.5W 1000W LED 150w MAX Installation Height: 1.8-2.5m Detection Moving Speed: 0.6-1.5m/s...
  • Page 2 TEST: units, light etc.   Turn the SENS knob on the maximum (+).Turn the LUX knob Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall plants etc. to the maximum (sun). Turn the TIME knob to the minimum (10s).