Advertisement
•
After ironing or between garments, set your
steamer down with the handle resting on a flat,
stable surface. You can use the heat resistant
bag to rest your steamer on (Fig. E).
CERAMIC HEATED PLATE
Your steamer features a ceramic heated plate that helps smooth out
wrinkles and creases on the areas of garments that are more difficult to
reach with steam alone. The temperature of the plate is safe for all ironable
fabrics.
To press garments (collars, cuffs, etc.) place it on a flat, heat resistant
surface. Keep the plate in contact with the garment. Use steam as
required. You can use the heat resitant bag to iron on (Fig F).
Important: Always make sure that the surface you use to iron on will not be
affected or damaged by heat or steam!
AUTO SHUT OFF
If you haven't used the steam trigger for approximately 8 minutes, your steamer will enter auto
shut off mode. In auto shut off mode, the blue light will flash. To restart your steamer, press and
hold the steam trigger for a few seconds until your steamer begins to steam again and the blue
light stops flashing.
CARE AND MAINTENANCE
•
When storing or after use, do not wrap the mains cord around the appliance as this can
damage the cord.
1.
Make sure steamer is off, unplugged and completely cool.
2.
Wipe all surfaces with a clean damp cloth.
3.
After the steamer has been thoroughly dried, turn it back on and lightly steam over an old
cloth. This will help remove any residue left in the steam holes.
4.
To avoid mineral buildup, empty the tank after each use.
CLEANING ATTACHMENTS
•
Fabric attachment: Wipe with damp cloth to clean.
•
Delicate fabric attachment: Wash with cold water and small amounts of a gentle cleanser if
needed. The fabric cannot be removed.
•
Upholstery attachment: The fabric can be removed and hand washed with cold water and a
gentle cleanser.
•
Lint Attachment: Wipe with damp cloth to clean.
h
A
h
E
7
h
C
h
E
7
6
h
B
CLICK!
3
h
D
3
MAX
Advertisement
