Advertisement
Depending on the design of your speakers, there are two options for fi xing:
A speakers with keyhole opening and B speakers with a threaded insert.
A Speakers with keyhole opening
1. Connect the speaker cable.
2. Carefully use the keyhole opening to hang the speaker on
the pre-installed holding screw.
B Speakers with threaded insert
1. First remove the pre-installed
holding screw.
Technical data
Max. carrying capacity:
Height:
Base plate dimensions:
You can obtain further technical data on our website.
2. Turn the threaded pin into the threaded
insert on the back of the speaker.
5 kg
1090 mm
225 x 225 mm
Page 5
3. Tighten the countersunk head nut on the back.
3. Insert the threaded pin, which has
been screwed into place, in the
opening where the holding screw
was installed before. Use the coun-
tersunk head nut on the back to
screw it tight.
Advertisement
