Advertisement
Assembly of speaker stand for column speakers
a
1. Use two cylinder head screws ⑥ to screw the tube
securely onto the base plate
bolt (a) is facing forward.
2. Run the speaker cable through the hole in the base plate
⑧ and through the tube ① until it extends somewhat out
of the tube on the top.
①
⑧
⑥
①
⑧
. Align the tube so that the
①
⑧
②
3. Now run the speaker cable through the second tube ②
from below until you can pull the speaker cable out of the
upper opening.
4. Push the tube ② all the way into the tube ① . Make sure
that the large oval openings in the tube ② are facing to the
back.
②
①
②
①
Advertisement
