Daitsu CADR-160 User Manual page 6

Table of Contents

Advertisement

Precautions
♦ Installation instructions
1. Do not place in the following places:
• Direct sunlight or facing the air outlet and heated places (may
cause deformation, Deterioration, discoloration, and failure).
• Equipment accessories such as TVs and radios (which may
cause image distortion and noise). Please place it at a distance
of 1m or more. At the same time, if the same socket is used with
these devices, image plugging and noise may occur when the
power plug is inserted.
When this happens, plug the power cord into a different outlet.
2. For indoor dust such as pollen, the product should be placed
on the ground. Since pollen, dust, etc. are likely to fall near the
floor, it is recommended to place the product on a flat floor in the
room.
3. In order to effectively circulate the air in the room.
In order not to block the air inlet and outlet, place the product
about 30cm or more from the left and right sides of the wall,
furniture, curtains, etc. In order to use this product more
effectively, please keep the back of the product at least 20cm
away from the wall.
4. Do not place objects on the main unit (otherwise it may cause
the machine to malfunction). Special Note: Do not place magnets
and metal objects.
5. Do not block the air inlet and outlet, for example, do not place
objects on the air outlet. Or in front of the air inlet.
Sun
1m
30cm
20cm
goods
outlet
inlet

Advertisement

Table of Contents
loading

Table of Contents