Advertisement
4.5.
To lower load, VERY slowly turn release valve at base of ram anti-clockwise.
4.6.
The crane is not a transportation device but may be used to reposition the load ready for working on. Lower the load and jib as far as
possible before attempting to move the crane and load. Do not attempt to move in a sideways direction.
The crane is not designed to sustain the load indefinitely.
When you have positioned the load for working, fully lower the load onto a secure and suitable work surface, being fully aware of your
own and other persons locations in relation to the lowering load.
4.7.
When the load has been successfully lowered and secured, remove the lifting harnesses etc. and place the crane in a safe location, having
ensured that the ram is fully retracted.
5. MAINTENANCE
NOTE: The crane MUST be maintained in accordance with these instructions.
5.1.
Always keep the crane clean and dry.
5.2.
Lubrication
5.2.1. Oil all working parts monthly.
5.2.2. The ram is filled with oil and should only require occasional topping up - DO NOT use brake fluid, as this will damage the hydraulic seals.
Proceed as follows:
a) Use only good quality hydraulic jack oil available from your Sealey dealer.
b) Fully lower the jib extension arm.
c) DO NOT OVERFILL as this will cause failure.
d) After filling with hydraulic oil, pump the crane up to full height and pour off any excess oil.
5.3.
Inspection of crane before use
5.3.1. Before each use the crane must be inspected for leaks, damage, loose or missing parts.
5.3.2. The crane must be inspected immediately if it has been subject to an abnormal load or shock load. It is recommended that such an
inspection is made by the supplier’s authorised service agent.
5.3.3. The owner and/or operators must be aware that repair of this equipment will require specialised knowledge and facilities.
It is recommended that an annual inspection of the crane is made through the supplier’s authorised service agent.
5.4.
Storage
Always store the crane fully closed so that the jib is in its lowest position and the ram is closed.
IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THE CRANE.
Hydraulic products are only repaired by local service agents. We have service/repair agents in all parts of the UK.
DO NOT RETURN PRODUCT TO US. Please telephone us on 01284 757500 to obtain the address and telephone number of your local agent.
If product is under guarantee please contact your dealer.
6. OWNER’S/OPERATOR’S RESPONSIBILITIES
The owner and/or operator shall study these instructions and retain them for future use.
6.1.
Understanding instructions and warnings
The owner and/or operator shall understand the operating instructions and warnings before operating the crane. Warning information must be
emphasised and understood. If the operator is not fluent in English, the instructions and warnings must be read to, and discussed with, the
operator in the operator’s native language by the purchaser/owner, making sure the operator understands the content.
6.2.
Damaged crane
If the crane appears to be damaged, badly worn, or operates abnormally IT MUST BE REMOVED FROM SERVICE! It is recommended that
necessary repairs be made by the supplier’s authorised service agent.
6.3.
Decommissioning
After years of normal wear, the crane will eventually come to the end of its safe serviceable life. If, and when, this happens, ensure that the
hydraulic oil is drained off and disposed of in accordance with local authority regulations.
6.4.
Test Certificate
In accordance with the requirements of the UK Health and Safety Executive, a test certificate is supplied with this crane. The test certificate is
valid for one year from the date of first placing the crane into use. Your insurance company will want to have a copy of the test certificate for
their file. Additional copies of the test certificate can be purchased within one year of the date of supply. If you need a copy please ask your
dealer. After one year your insurance company has the right to request a re-test of the crane. This is a chargeable service and can be obtained
by contacting companies listed under “Lifting Gear” in Yellow Pages.
CRANE GUARANTEE
Your crane is guaranteed for one year from the date of purchase. The guarantee does not cover faults caused by incorrect use, lack of maintenance
or accidental damage, or damage caused to third parties through misuse. You are recommended to inform your insurers and check that
adequate cover is in place. Warranty claims must be supported by a copy of the dated receipt for the crane.
Folding Crane. Model PH20.
98/37/EC, Docks regulations 1934, 18a 22a EN292-2.
Model No:
Serial No:
Batch No:
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name, address and postcode.
Sole UK Distributor,
Sealey Group, Bury St. Edmunds, Suffolk.
Declaration of Conformity
here is in conformity with the following standards and directives.
PH20
Signed by Mark Sweetman
The construction file for this product is held by the Manufacturer and may be inspected, by a national
authority, upon request to Jack Sealey Ltd.
01284 757500
We, the sole importer into the UK, declare that the product listed
24th July 2000
01284 703534
E-mail: sales@sealey.co.uk
For Jack Sealey Ltd.
Sole importer into the UK
of Sealey Quality Machinery.
PH20 - 0016 - (2) - 240801
Advertisement
