Related Manuals for Carson Phantom Projector Lift
Summary of Contents for Carson Phantom Projector Lift
- Page 1 Phantom Projector Lift Instruction manual for Phantom projector lift Please read this manual before installing and using the projection screen. Retain this manual for future reference.
- Page 2 1. Projector mount body (1pc) 10. Hexagon socket scewdriver (1pcs) 2. Top base plate (1pc) 11. Compression Springs (4pc) 3. Ceiling installation plate (1 pcs) 12. M10*20 cross recessed large flat head 4. 600*600mm ceiling cover plate (1pcs) screws (4pcs) 5.
-
Page 3: Important Safety Tips
Important Safety Tips WARNING: Incorrect installation and improper use may lead to mechanical failure or personal injury. Considerations for installing / using this product 1. Handle with care to avoid damage. 2. Do not expose the product to rainwater or any other form of moisture. 3. -
Page 4: Installation
Installation Use a 10mm diameter drill bit to drill holes in marked positions on the ceiling, then use the 8*80 in those holes expansion bolts to install the base plate. Picture 3 Picture 1 Picture 2 The wall 8*80expansion bolt Top base plate Slide the main body of the motorized projector mount into the top base plate,... - Page 5 Pick the correct screw according to your projector model to install the projector and U - shaped hanger together. Press the ‘down’ button on the remote to lower the projector mount. Install the projector on the projector mount. Tighten the screws. Projector installation complete.
- Page 6 Follow the instruction below to install ceiling installation plate. hexagonal nut bottom plate Compression Springs at mat hexagonal nut M8 screws Ceiling installation plate at mat hexagonal nut...
- Page 7 Follow the instruction below to install ceiling cover plate. Adjust the connecting bolts so that the cover plate ts into the ceiling better Ceiling decorative board frame 600*600mm ceiling cover plate M3*10 cross recessed large at head screws...
- Page 8 Adjust the tilt Angle of the projector. Mount the 600*600 ceiling cover plate, along the guide rail direction of the ceiling installation plate. Screw xing. Ceiling installation plate The projection direction 600*600mm ceiling cover plate Ceiling installation The projection direction plate The projection direction screw...
- Page 9 Use the motor stroke adjusting rod to adjust ‘’up limit size’’ and ‘’down limit size’’ whenever necessary. For ‘down limit’ adjustment, turn For ‘up limit’ adjustment, turn Red White knob: knob: Anti-clockwise – to add ‘down limit’ Anti-clockwise – to reduce ‘up limit’ Clockwise –...
- Page 10 enquiry@carsonscreens.com.au carsonscreens.com.au...
Need help?
Do you have a question about the Phantom Projector Lift and is the answer not in the manual?
Questions and answers