Water Fitting Requirements; Pipe Connections; General Installation Notes - Nabis A05034 Instructions

Water Fitting Requirements

It is important to ensure that this product is installed in accordance with current Water Regulations and good plumbing
practice.
Please note - This product is intended to be used in conjunction with other products such as a concealed shower valve.

Pipe Connections

IMPORTANT. Before making any inlet pipe connections all supplies MUST be thoroughly flushed to remove any
debris. Failure to do so could result in damage or low flow from the fitting.

General Installation Notes

• Care must be taken during installation to prevent any risk of damage to the product or injury to installer.
• Installation must be carried out by a qualified and competent person and in accordance with the instructions supplied.
• Installations must comply with all Local and National Water Authority Regulations and Building/Plumbing
Regulations.
• Ensure that you have read and understood all sections of this manual before installation.