Page 2
IMPORTANT Please familiarise yourself with the fitting instructions before commencing fitting. 1 Check that you have the tools required 2 Check that the installation site is compatible with size of door supplied 3 Check all the enclosure components 4 Check that the installation kit is complete attempt to install the product unless you can tick DO NOT ALL 4 boxes...
Page 6
The profile must be checked with the spirit level whilst marking. Bath. Round Screw ST4x35...
Page 7
Take extra care not to drill through to exterior side. 3.0mm Screw ST3.5x8 with screw cover...
Page 8
The sealant should be applied to the outside edge. For right handed requirement, flip seal from left to right face as shown in diagram. Left Right Right Left Right Right Left Attention-Seal to be positioned on the inside of the bath.
Safety Information for User & Installer Important information for fitter: Installation information • It is recommended that only approved/qualified plumbers should install the product. • Incorrect installation of the enclosure will invalidate guarantee. Safety information prior to and during installation •...
Page 10
Helpline Should you require any technical help in association with your NABIS 0344 292 7062 products please call with your query. Warranty: Years For detail warranty information, please visit our website: www.wolseley.co.uk Wolseley CV34 6DY www.wolseley.co.uk...
Need help?
Do you have a question about the D02183 and is the answer not in the manual?
Questions and answers