MiraMate Big Magic Instructions

Test for Functionality
There is a coil tester for you to check whether Big
Magic is working. Place the coil tester on the PEMF mat.
The mat contains several large coils. During treatment,
the coil tester lights up if it is placed over one of these
coils. If the tester does not light up, it's probably
between the coils. Adjust the position until it is above
a coil.
Position the mat for treatment
Apply the mat to the area of your body where you
wish to receive the PEMF treatments. The mat is big
enough to treat a large area. The treatment area is
the size of the mat and the penetration height is
more than 30cm.
The treatment time depends on the actual ailments
you want to resolve. We recommend applying Big
Magic for more than 3 hours. You can also place the
PEMF mat under your sheet for overnight treatment.
The mat itself has been made to be soft and comfort-
able enough for sleeping.
Indicator Lights
Big Magic has 3 lights:
1. Power LED
The right LED illuminates
when Big Magic is receiving
power.
2. Pulsing LED
The left LED flashes when-
ever Big Magic sends an
electrical pulse to the mat.
3. Breathing LED
The beautiful breathing
light indicates Big Magic
is running.
If you place the unit on
a bedside table, it may
distract you from sleeping.
Push this button to turn off
the light.
Note
1. The PEMF mat can be fold easily for storage and travel.
Convenient for business trips and family vacations.
2. Clean the main unit and the mat using a damp cloth,
and dry before use.
3. For extra convenience, Big Magic can run 24 hours
non-stop with very low power consumption.
Instructions
M i r a M a t e
December · 2020
Simple Convenient Effective Versatile