Set-Up Routines - Cobra MR F55 Owner's Manual

Set-Up Routines

Operating Your Radio
Intro Operation Customer Warranty
Assistance
Set-Up Routines
Settings Menu
The Settings menu in the CobraMarine
Customer
many of its features, to adjust other features to suit your preferences, and to enter
Installation
Assistance
your user MMSI number.
Secondary Icons
To Enter The Settings Menu:
Call/Set Button
1. Press and hold the Call/Set button.
The Settings menu will appear on the LCD.
After entering the Settings menu, you can scroll
Notice Caution Warning
through it to make as many entries as you like.
Main Icons
Whenever the setting selection arrow appears in
Settings Menu
a feature portion of the menu, it will point to the
setting that was in effect when you entered the menu.
When you are finished with changes, you can exit
the Settings menu and return to Standby mode.
Intro Operation Customer
Assistance
Up/Down Buttons
To Exit The Settings Menu:
1. Use the Up/Down buttons to scroll down to
at the bottom of the menu.
EXIT
Customer
Installation
Assistance
2. With the arrow pointing to
Secondary Icons button to return the radio to Standby mode.
NOTE
Basic set-up routines are described here. For set-up
Exit
Notice Caution
routines that apply specifically to a particular function,
they are included in the section for that function.
38 English
™ VHF radio allows you to turn On and Off
Warranty
EXIT , press the Call/Set
Warning
Operating Your Radio
Intro Operation
LCD Backlight
•
The LCD has a backlight lamp to make it visible in the dark.
This lamp can be adjusted for brightness or turned Off.
Installation
Lamp Adjustment
Secondary Icons
High/Medium/Low/Off
Notice
LCD Contrast
The LCD backlight will not be visible in daylight, but the LCD Contrast
can be adjusted to make it easier to read in different light conditions.
Contrast
Contrast Setting
Set-Up Routines
Customer Warranty
Assistance
Customer
To Adjust The Backlight Level:
Assistance
1. Enter the Settings menu and scroll to
(lamp adjustment) with the Up/Down buttons.
2. Press the Call/Set button and observe the current
backlight setting — ,
HIGH MEDIUM
3. Use the Up/Down buttons to switch to the setting you want.
Caution Warning
4. Press the Call/Set button to select the backlight setting.
5. Use the Up/Down buttons to scroll to
6. Press the Call/Set button to return to the Settings menu.
When the backlight is turned On to any intensity,
the lamp will be lit whenever the radio is On.
To Change The Contrast:
1. Enter the Settings menu and scroll to
with the Up/Down buttons.
2. Press the Call/Set button and observe the current
contrast setting — a number between one (1) and 16.
3. Use the Up/Down buttons to change the number
up or down.
4. Press the Call/Set button to select a contrast level.
5. Use the Up/Down buttons to scroll to
6. Press the Call/Set button to return to the Settings menu.
Nothing comes close to a Cobra
LAMP ADJ
, or .
LOW OFF
.
EXIT
CONTRAST
EXIT .
®
39