Table of Contents
Advertisement
Notes for installation
Remove
Before removing air conditioner to the other place, you
Then it must be done under the direction of the profe-
ssional technician. In addition, the charge of this must
be paid.
Noise
enlargement of noise and vibration.
● Don't put anything in front of the outlet of the unit
to avoid increasing noise.
● Be sure that hot air or noise will not inconvenience neighbors.
● Please contact the seller as soon as there is strange noise during operation.
● Please use the safety support.
Electric wiring
● Must connect with ground reliably.
● The exclusive circuit must be used. But removable socket
can't be used because poor contact of it can cause over heat
● Don't pull the power cord strongly.
and leakage current is less than 30mA.
● Connecting method between air conditioners and power cord and intercon-
necting method of each individual element with one another should accord
with wiring diagram on the unit.
● The air conditioner should be installed in accordance with national wiring
regulation.
● An all-pole disconnection switch having a contact separation of at least 3mm
● Air switch (thermal-magnetic breaker) should be installed in the circuit.
● If the supply cord is damaged,it must be replaced by the manufacturer or
● All the electrical work must be done according to the local wiring regulations.
- 11 -
Advertisement
Table of Contents
