Advertisement
ASSEMBLY
Step 1:
Arrange the two stand bases (E) apart from each other.
•
Insert each base tube (C) on top of each stand base. Place a 3-way connector (G) on
•
top of each stand base.
Step 2:
Unfold the projector screen (A).
•
Connect three long tubes (B) using two vertical connectors (F) to form a long pole
•
assembly. Insert this long pole assembly through the bottom edge of the projector
screen.
•
Secure the bottom edge by inserting both ends of the pole assembly into the 3-way
connectors placed in step 1.
Advertisement
