Advertisement
SOFTWARE INSTALLATION
This section will lead you to install the driver and utility of the
2.4GHz 802.11n MPCI Module via Windows OS installation.
Windows 98se/ME/2000/XP Utility and Driver
Installation
1. Insert the 2.4GHz 802.11n MPCI Module Driver & Utility
CD-ROM into computer's CD-ROM Drive and it will
automatically run a setup menu and install the driver and the
utility, for Win98se, please reboot the system to install the
driver to the system properly. In some specific setting on
Windows system, you may need to proceed the software
manually, go to your Windows Start menu and choose Run,
type "D:\Utility\Setup.exe" in the dialog box (D:\ will
depend on where your CD-ROM drive is located) and click
OK.
2. If you need to install the driver manually, refer each
Windows OS to the following CD-Rom directory path:
D:\Drivers\<Windows OS>\SIS163U.INF.
Note: (D:\ will depends on where the CD-ROM drive is
located and <Windows OS> will depend on the Windows
Operating System you are using).
8
Advertisement
