Citizen CBM-230/231 User Manual page 45

(24) Transmitting the printer status (ESC v)
Code : [1B]h + [76]h
Current printer status is transmitted..
l Status sent out consists of 1 byte whose content is as in the table below.
l In DTR/DSR control, after receptible state of the host (DSR signal being in SPACE state)
is confirmed, only 1 byte is transmitted. In XON/XOFF control, DSR signal state not being
confirmed, only 1 byte is transmitted.
l In DTR/DSR control, when the host is in unreceptible state(DSR signal being in
MARK state), it waits until receptible state is created.
IT
0
1
2
3
4
5
6
7
Remarks. This command is valid only for serial interface model.
CITIZEN
FUNCTION
Paper near end
Undefined
Paper end
Undefined
Unused
Undefined
Undefined
Undefined
VALUE
0
Paper available Paper not available
Paper available Paper not available
Fixed to 0
45
CBM-230/231 User's Manual
1
-