Page 1
Rangemaster TXIQ24 24 Channel remote control User manual Order code: TXIQ24 Revision Date: 03.08.21 R O F E S S I O H O O T I N G R O U N D U T O M A T I O N...
Rangemaster TXIQ24 – 24 Channel remote control Order code: TXIQ24 1. DESCRIPTION OF THE UNIT Rangemaster TXIQ24 is a 24 channel remote control of the “IQ series” 1.1 FEATURES 24 Channels • 32 possible addresses • Digital encryption • No interference with other layouts •...
Rangemaster TXIQ24 – 24 Channel remote control Order code: TXIQ24 2. OPERATING 2.1 FUNCTIONALITY To release the target, hold the button for 0.2-0.5 seconds. E.g.: Button A – Trap A, Button B – Trap B, etc. To throw Rafale targets keep pressing the button untill the second target is released.
Rangemaster TXIQ24 – 24 Channel remote control Order code: TXIQ24 2.3 SETTING THE ADDRESS To make the remote control compatible with the receiver, they both should be set to the same channel. To be able to set the address use the DIP switch placed on the PCB inside the enclosure.
Rangemaster TXIQ24 – 24 Channel remote control Order code: TXIQ24 2.4 BATTERIES To change the batteries, open the enclosure (refer to 2.2), remove discharged batteries and insert new ones. For the remote control use 4 or 8 CR2032 batteries. In order to make sure that contact of the batteries is good, every time when changing the batteries, please push the connecting parts of the battery holder inside.
This period starts upon receipt of the product. Rangemaster System will not be liable for loss of data or loss of profit or turnover due to a defect. The warranty only includes repair or replacement of defect components, which failed during daily use.