To ensure proper functionality and optimum performance, it is STRONGLY recommended that Hillphoenix specialty cases be installed/serviced by qualifi ed tech-
nicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. For a list of Hillphoenix-authorized installation/
service contractors, please visit our website at www.hillphoenix.com.
Appendices To ensure proper functionality and optimum performance, it is STRONGLY recommended that Hillphoenix specialty cases be installed/serviced by qualifi ed tech- nicians who have experience working with commercial refrigerated display merchandisers and storage cabinets. For a list of Hillphoenix-authorized installation/ service contractors, please visit our website at www.hillphoenix.com.
Page 3
For Cases with Shelf Lighting Systems Hillphoenix does NOT design any of its shelf lighting systems or any of its display cases with shelf lighting systems for direct or indirect exposure to water or other liquids. The use of a misting system or water hose...
Page 4
, the safety of our customers and employees, as well as the ongo- ing performance of our products, are top priorities. To that end, we include impor- tant warning messages in all Hillphoenix installation and operations handbooks, accompanied by an alert symbol paired with the word "DANGER", "WARNING", or "CAUTION".
Page 5
Revision History • new manual format_09/21...
Self-Service Open Multi-Deck Merchandiser w/ Service Dome & DRS PTD-H-H 4', 6', 8', 10' & 12' (Deli) GENERAL NOTES: • "---" Indicates that the feature is not an option on this case model and/or the data is not yet available at this time.
Page 7
TECHNICAL REFERENCE Self-Service Open Multi-Deck Merchandiser w/ Service Dome & DRS PTD-H-H 4', 6', 8', 10' & 12' (Deli) SERVICE DATA (DOME) Bottom Total Amps Total Amps Heaters Heaters Lights Shelves (120/208-1-60) (120/208-3-60) Case Watts Watts Watts Watts Length Qnty...
Page 8
TECHNICAL REFERENCE TECHNICAL REFERENCE Self-Service Open Multi-Deck Merchandiser w/ Service Dome & DRS PTD-H-H 4', 6', 8', 10' & 12' (Deli) LIGHTING DATA Fluorescent Lighting (Per Light Row) Lights Dome Base Case Light Length Length Amps Watts Amps Watts 0.09 18.7...
We are always interested in your suggestions for improvements (e.g. case design, technical documents, etc.). Please feel free to contact our Marketing Services group at the number listed below. Thank you for choosing Hillphoenix, and we wish you the very best in outstanding food merchandising.
CASE INSTALLATION LOCATION This hot display case has been designed for displaying and storing perishable food product. It is engineered for air-con- SUPPORTS ditioned stores with a maximum ambient of 75°F and 55% relative humidity. When selecting the location for placement of this case, avoid the following conditions: Excessive Air Movement Fig.
Page 13
CASE INSTALLATION 3. Install the bumper, if applicable, into pre-attached bumper applicable, front panel trim (supplied). track and snap into place. 7. Install the bumper into pre-attached bumper track and 4. After suffi cient time has passed to allow for bumper snap into place.
Page 14
T-8 lamp (Fig. 5). Simultaneously pull down at both ends of the old T-8 lamp to remove. Hillphoenix hot cases are equipped with T-8 lights and feature specially designed light reflectors in the cornice to improve the illumination of products.
LIGHTING, HEAT & POWER SUPPLIES posite ends of the same shelf and the color designated white/ ▲ D A N G E R black receptacles to match at their corresponding end of the inside back of the case. SHOCK HAZARD Always disconnect power to case when cleaning, In order to supply heat to the shelves this black heat cord must servicing or confi...
TECHNICAL REFERENCE PRE-POWER CHECKLIST Before powering-up the case, be certain that all of the steps listed below have been completed to ensure proper case functionality, safety and compliance with warranty terms. Have you thoroughly examined the case for shipping damage? (see pg. 7) Have you checked the horizontal level of the case? (see pg.
HEAT CONTROLS & SETTINGS HEAT CONTROLS Hillphoenix case hot wells are equipped with digital controls (Fig. 10). To adjust press the appropriate arrow fi rmly. There is one control per well for individual functions. The controls are normally grouped in clusters. Each case will have Control #1 and one or more Control #2.
Page 18
TECHNICAL REFERENCE HEAT CONTROLS & SETTINGS Functions: Overhead Heat Control Functions: Case Power ON/OFF Lights ON/OFF Range: (0-9) Top Fan ON/OFF 0 = OFF Overhead Heat 1 = Lowest Setting 9 = Highest Setting Range: (0-9) 0 = OFF PRODUCT DISPLAY & SETTINGS 1 = Lowest Setting 9 = Highest Setting This merchandiser is designed to operate without water in the...
Page 19
HEAT CONTROLS & SETTINGS To adjust temperatures, change the heat setting one number at a time by holding the UP or DOWN button 2-3 seconds to ensure change made. Allow 1-2 hours for the case temperature to even out before continuing. The settings will need to be adjusted to your specific product and store conditions.
TECHNICAL REFERENCE CASE CLEANING 3. Use a clean, disposable cloth (approved item) to thorough- CASE CLEANING ly clean all areas of the case. A periodic cleaning schedule should be established to maintain 4. Wipe down doors with a clean, disposable cloth (approved proper sanitation, insure maximum operating efficiency, and item).
(Minimum FDA requirement is 165 F - 175 Cause Unknown. (Refer to action.) (Hillphoenix recommendation: 175 Its is important to ask the right questions to -What kind of packaging are they using? determine the correct solution. -Is it resting fl at on heated surface?
TECHNICAL REFERENCE PARTS ORDERING Contact the Service Parts Department at: 1-844-HPX-PART (1-844-479-7278) dfr-ia-parts@doverfoodretail.com Provide the following information about the part you are ordering: • Model number and serial number* of the case for which the part is intended. • Length of the part (if applicable). •...
Page 23
APPENDIX A1 ....................Wiring Information B1 ........................Parts List...
Page 25
B1: PARTS LIST Dome Ceramic Top Heat Guard Dome Ceramic Top Heat Lift Glass Hardware Case Top Front Lift Glass Base Inside Back Interior End Panel Die Board Plex Die Board Front Toekick Base Heated Bottom Deck Base Insulated Lower Deck End Toe Kick End Panel Trim End Panel...
Page 26
Hill PHOENIX, Inc. Hereinafter Referred To As Manufacturer LIMITED WARRANTY GENERAL WARRANTY Manufacturer’s products are warranted to be free from defects in materials and workmanship under normal use and maintenance for fourteen months from date of shipment from manufacturer (the “Base Warranty Period”). In the event of a qualifying warranty claim, a new or rebuilt part to replace any defective part will be provided without charge.
Page 27
703 Franklin Street, PO Box 478, Keosauqua, IA 52565 Due to our commitment to continuous improvement, all specifications are subject to change without notice. Hillphoenix is a Sustaining Member of the American Society of Quality. Visit our website at www.hillphoenix.com...
Need help?
Do you have a question about the DELI and is the answer not in the manual?
Questions and answers