Page 1
Neumärker PROFESSIONAL Lohstr. 13 - 58675 Hemer / P.O.Box 4063 - 58663 Hemer phone: 02372/9274-17 fax: 02372/9274-33 GERMANY Operating Manual Crepes Dame I electric 12-40910 Crepes Dame II electric 12-40920...
Page 2
The units described in these operating instructions are provided with the CE-lable, and they comply to the EC regulations no. 73/23/EWG and 89/336/EWG. 2. Technical details (power) 230 V / 3 kW Crepes Dame I, art.-no. 12-40910 400 V / 6 kW Crepes Dame II, art.-no. 12-40920 3. Installation The units with 230 volts are ready to be plugged into sockets which have been secured with max.
Page 3
3.1 Positioning The side and rear panels of the unit have to be positioned to enable the subsequent electrical installation and maintenance of the unit. The appliances are neither suitable for integrating into a kitchen unit nor for mounting in line. If the unit has to be set-up close to walls, partition panels, kitchen cabinets, decorative edgings, etc.
Page 4
instructions to any further user of this unit. Contact only an authorized technical service for carrying-out repairs and insist on using original spare parts. Failure to observe our above instructions may affect your safety when operating the unit. 2. Instructions for use Important: The baking plates or cast plates become very hot during operation.
Page 5
Remember: when the control lamp goes on - the unit is being heated when the control lamp goes off - the selected heat has been reached. The desired temperature is set by turning the regulator clockwise. The max. temperature is 300 °C.
Page 6
5. For your safety: All units described in these operating instructions become hotter than 60°C. Please adhere to our following instructions in order to avoid burning yourself: Baking plates: Operate the unit at an appropriate distance and make sure that your arm or your hands do not come into contact with the cast plates.
Need help?
Do you have a question about the Crepes Dame I and is the answer not in the manual?
Questions and answers