Lightwave Link Plus Instructions page 3

2
Setting up the Link Plus
2.1 Attach the Ethernet cable
Take the Ethernet cable (supplied) and connect it to
any spare available LAN port on your wireless router.
Connect the other end of the cable to the Lightwave
Link Plus' single port.
2.2 Attach the power supply 2.3 Check the indicator light
Plug in the power supply and push the Micro USB The LED indicator is used to indicate the status of the
connector into the socket on the back of the Link Plus. Link Plus and also to indicate if there is a problem. If
The Link Plus will now enter its startup sequence and there is a problem reported, it will usually refer to an
will attempt to find a connection to the Lightwave insecure cable connection or a server connection
server. A solid amber light indicates that a connection is problem (see list on the right). If the Link Plus has already
being attempted, and a solid green light will show once been set up, the App will display details of any specific
a connection has been established. Once the green problem; otherwise, please visit the support section at
light appears, the Link Plus is ready to be set up on the www.lightwaverf.com for advice.
Lightwave Link Plus App.
LED Indicator lights
Steady green: Status normal
Flashing green: Transmitting
Flashing green / amber: Linking mode
Steady red: Cannot contact server
Need some help?
support@lightwaverf.com www.lightwaverf.com
3.1 Download & open the App
Download the Lightwave Link Plus App from the
App Store. Open the App and follow the instructions
and tutorials which will take you through the setup
procedure.
You can also use the Lightwave Web App to set up and
control your Link Plus. This is a more extensive platform
very suited to setting up and viewing large installs. This
can be accessed at www.lightwaverf.com.
3.2 Follow the in-app instructions
Once your Link Plus is set up, you will be able to register
multiple smartphones or tablets to control any number
of Lightwave devices in your home.
+44 (0)121 250 3625
3
Setting up the App
HomeKit
You will also be able to control Lightwave devices via
HomeKit using the code below. To do this, open the
Home app on your iPhone or iPad, select the Link Plus
and manually enter the code.
Communication between iPhone, iPad, or iPod
touch and the HomeKit-enabled Link Plus is secured
by HomeKit technology. Controlling this HomeKit
enabled accessory automatically and away from home
requires an Apple TV with tvOS 10.3.2 or later or an
iPad with iOS 10.3.2 or later set up as a home hub.
Apple, iPhone, iPad and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
HomeKit is a trademark of Apple Inc.
xx-xx-xx-xx