ASROCK Z390 Phantom Gaming 4 Manual page 26

Thunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 29)
RGB LED Headers
(4-pin RGB_LED1)
(see p.1, No. 22)
(4-pin RGB_LED2)
(see p.1, No. 21)
Addressable LED Header
(3-pin ADDR_LED1)
(see p.1, No. 24)
Performance Mode / Easy
OC Header
(4-pin PM_OC)
(see p.1, No. 27)
24
Please connect a Thunderbolt™
1
add-in card (AIC) to this
connector via the GPIO cable.
RGB LED header is used to
connect RGB LED extension
1
cable which allows users to
12V G R B
choose from various LED light-
ing effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 37 for for
further instructions on this
header.
This header is used to connect
1
Addressable LED extension cable
GND
which allows users to choose
DO_ADDR
VOUT
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 38 for
further instructions on this
header.
Please connect the OC switch
1
and OC LED indicator on the
Button+
chassis to this header according
Button-
OCLED+
to the pin assignments. Note the
OCLED -
positive and negative pins before
connecting the cables.