Pyle PSIB27X2 Manual

PSIB27X2
2 Pcs. Sound Recording Booth Box
Studio Soundproofing Foam Shield Isolation Filter Cube
Note: Microphone and tripod are not included in the list
of contents.
The portable sound booth is used to provide sound
protection and to reduce sound re ection. The booth can
be open and assembled in a short time. It could be placed
on the table. It is suitable for various kind of microphone
including vocal microphone, instrument microphone and
other recording microphone, etc.
Note: Please read this user's manual carefully before using the sound booth. Any
mishandling of the product due to misunderstand of negligence of this manual may
lead to malfunction.
Installation Guide
1. Take all the contents from the package and make them properly placed
2. Pull the handle of the booth frame and make it properly structured, the side with
the handle should be in the top when you set up your booth.
Handle: This side should be the top side
3. Zip the back side of the frame.
This zip gap can be also used for the mic cable, add the
mic cable rstly if you want to let you mic cable go from
the back,the XLR female end should go inside normally
around 2ft.
www.PyleUSA.com