Advertisement
Page 1 of 2
ATG Electronics® Aero LED Area Light
USER GUIDE
NOTE:
Please read this entire manual prior to installation.
The product must be used in accordance with the voltage and frequency ranges indicated on the driver.
The product is suitable for indoor and outdoor use, and it is moisture proof and dust proof.
Specifications are subject to change without notice. Please visit www.atgelectronics.com for the most
recent user guide.
INCLUDED IN THIS BOX
ATG Electronics® Aero LED Area Light, 1 PCs
Accessory Kit, 1 Set
User Guide, 1 PCs
UNPACKING
1)
Unpack and carefully examine the product and parts for missing and/or damaged items.
2)
Report any damage and save all packing materials if any part(s) were damaged during shipping.
3)
Do not attempt to use this apparatus if it is damaged.
INSTALLATION INSTRUCTIONS
1)
The product is to be installed by a qualified electrician or technician in accordance with relevant local
codes.
2)
Due to risk of electric shock, verify that the main power source is turned off prior to and during
installation and maintenance.
MAINTENANCE
1)
Use a dry or slightly moistened cloth for cleaning.
2)
Never use any chemicals or abrasive materials for cleaning.
INSTALLATION :
1） Put the Accessory to the lamp pole with screws.
Square Pole Architectural Arm
www.atgelectronics.com
Toll free: 877-461-5333
E-mail: sales@atgelectronics.com
REV1.1
Advertisement
Table of Contents
Related Manuals for ATG Electronics Aero LED Area Light
Summary of Contents for ATG Electronics Aero LED Area Light
- Page 1 The product is suitable for indoor and outdoor use, and it is moisture proof and dust proof. Specifications are subject to change without notice. Please visit www.atgelectronics.com for the most recent user guide. INCLUDED IN THIS BOX ATG Electronics® Aero LED Area Light, 1 PCs Accessory Kit, 1 Set User Guide, 1 PCs UNPACKING Unpack and carefully examine the product and parts for missing and/or damaged items.
- Page 2 This Accessory has been configured to mount to a round poles 4to 6 inches (101-152 mm) in diameter. Round Pole Architectural Arm 2） Put the Aero LED Area Light to the lamp pole. Tighten mounting screws. 3） Connect the source VAC to driver VAC in and the dimming source to driver DIM in.
Need help?
Do you have a question about the Aero LED Area Light and is the answer not in the manual?
Questions and answers