Advertisement
Page 1 of 2
ATG Electronics® UFO LED Highbay
USER GUIDE
NOTE
Please read this entire manual to fully understand and safely use this product.
Specifications are subject to change without notice. Please visit
www.atgelectronics.com
for the most
recent user guide versions.
INCLUDED IN THIS BOX
ATG Electronics® UFO LED Highbay, 1 PCs
User Guide, 1 Set
UNPACKING
1) Unpack and carefully examine the product.
2) Report any damage and save all packing materials if any part(s) were damaged during shipping.
3) Do not attempt to use this apparatus if it is damaged.
INSTALLATION INSTRUCTIONS
1) CONSULT A QUALIFIED ELECTRICIAN
TO ENSURE CORRECT BRANCH
CIRCUIT
CONDUCTOR.
2)
The product should be installed and operated by a qualified electrician or technician in accordance
with relevant local codes.
3) Risk of electric shock. Ensure that main power source is off when wiring or soldering the sections of
the product.
MAINTENANCE
1) Disconnect the product from the power supply prior to cleaning.
2) Use a dry or slightly moistened cloth for cleaning.
www.atgelectronics.com
Toll free: 877-461-5333
E-mail: sales@atgelectronics.com
REV1.0
Advertisement
Table of Contents
Related Manuals for ATG Electronics UFO
Summary of Contents for ATG Electronics UFO
- Page 1 INCLUDED IN THIS BOX ATG Electronics® UFO LED Highbay, 1 PCs User Guide, 1 Set UNPACKING 1) Unpack and carefully examine the product. 2) Report any damage and save all packing materials if any part(s) were damaged during shipping.
- Page 2 Page 2 of 2 INSTALLATION STEPS 1. Attach the housing (optional) to the highbay 2. Tightly fix the housing on the highbay with screws. body. Aluminum Shroud is available at an extra charge. 3. Screw the hanging ring to the highbay 4.
Need help?
Do you have a question about the UFO and is the answer not in the manual?
Questions and answers