Advertisement
Operation Guide 5060
■ ■ The x Second Hand indicates NO (N) when I check the result of the latest
receive operation.
Possible Cause
Remedy
•
You are wearing or moving the
watch, or performing a button
Keep the watch in an area where reception
operation during the signal receive
conditions are good while the signal receive
operation.
operation is performed.
•
The watch is in an area with poor
reception conditions.
You are in an area where signal
reception is not possible for some
See "Approximate Reception Ranges".
reason.
•
Check the website of the organization that
maintains the time calibration signal in your area
The calibration signal is not being
for information about its down times.
transmitted for some reason.
•
Try again later.
■ ■ The current time setting changes after I set it manually.
You may have the watch configured for Auto Receive of the time calibration signal,
which will cause the time to be adjusted automatically according to your currently
selected Home City. If this results in the wrong time setting, check your Home City
setting and correct it, if necessary.
■ ■ The current time setting is off by one hour.
Possible Cause
Remedy
Perform the operation under "To get ready for a
receive operation". The time setting will be adjusted
Signal reception on a day for
automatically as soon as signal reception is
switching between STD (standard
successful.
time)/DST (daylight saving time) may
If you are unable to receive the time calibration
have failed for some reason.
signal, change the STD (standard time)/DST
(daylight saving time) setting manually.
■ ■ Auto Receive is not performed or I cannot perform Manual Receive.
Possible Cause
Remedy
Auto Receive is not performed while the watch is
The watch is in the Stopwatch Mode
in the Stopwatch Mode or Countdown Timer Mode.
or Countdown Timer Mode.
Hold down C for about two seconds to enter the
Timekeeping Mode.
Check your Home City setting and correct it, if
Your Home City setting is wrong.
necessary.
Both Auto Receive and Manual Receive are
A countdown timer operation is in
impossible while a countdown is in progress. In the
progress.
Countdown Timer Mode, stop the timer operation
and then return to the Timekeeping Mode.
There is not enough power for signal
Expose the watch to light to charge it.
reception.
■ ■ Signal reception is being performed successfully, but the time and/or day is
wrong.
Possible Cause
Remedy
Check your Home City setting and correct it, if
Your Home City setting is wrong.
necessary.
The watch may have been exposed
to magnetism or strong impact, which
Adjust the watch's hand and day home position
has caused problems with proper
alignment.
hand and day alignment.
Specifications
Accuracy at normal temperature: ± 15 seconds a month (with no signal calibration)
Timekeeping: Hour, minutes (hand moves every 10 seconds), seconds, 24-hour,
day, day of the week
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 29 city codes and Coordinated
Universal Time); Daylight Saving Time (summer time) / Standard Time
Time Calibration Signal Reception: Auto receive up to six times a day (5 times a
day for the Chinese calibration signal; Remaining auto receives
cancelled as soon as one is successful); Manual receive
Receivable Time Calibration Signals:
Mainflingen, Germany (Call Sign: DCF77, Frequency: 77.5 kHz);
Anthorn, England (Call Sign: MSF, Frequency: 60.0 kHz); Fukushima,
Japan (Call Sign: JJY, Frequency: 40.0 kHz); Fukuoka/Saga, Japan
(Call Sign: JJY, Frequency: 60.0 kHz); Fort Collins, Colorado, the
United States (Call Sign: WWVB, Frequency: 60.0 kHz); Shangqiu City,
Henan Province, China (Call Sign: BPC, Frequency: 68.5 kHz)
Stopwatch: Measuring capacity: 23:59'59.95"
Measuring unit: 1/20 second
Measuring mode: Elapsed time, split time
Countdown Timer:
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments)
Other: Auto switching to elapsed time measurement (1-second units) when the end
of a countdown timer operation is reached
World Time: 29 cities (29 time zones) and Coordinated Universal Time
Other: Standard Time/Daylight Saving Time (summer time); Home City/World Time
City swapping
Alarm: Daily alarm
Other: Power Saving
Power Supply: Solar cell and one rechargeable battery
Approximate battery operating time: 5 months (no exposure to light after a
full charge; 10 seconds alarm beeper operation and one signal reception of
approximately 4 minutes per day)
City Code Table
City
UTC Offset/
City
Code
GMT Differential
PPG
Pago Pago
–11
HNL
Honolulu
–10
ANC
Anchorage
–9
LAX
Los Angeles
–8
DEN
Denver
–7
CHI
Chicago
–6
NYC
New York
–5
SCL
Santiago
–4
RIO
Rio De Janeiro
–3
FEN
Fernando de Noronha
–2
RAI
Praia
–1
UTC
0
LON
London
PAR
Paris
+1
ATH
Athens
+2
•
Based on data as of June 2008.
•
The rules governing global times (GMT differential and UTC offset) and summer
time are determined by each individual country.
City
UTC Offset/
City
Code
GMT Differential
JED
Jeddah
+3
THR
Tehran
+3.5
DXB
Dubai
+4
KBL
Kabul
+4.5
KHI
Karachi
+5
DEL
Delhi
+5.5
DAC
Dhaka
+6
RGN
Yangon
+6.5
BKK
Bangkok
+7
HKG
Hong Kong
+8
TYO
Tokyo
+9
ADL
Adelaide
+9.5
SYD
Sydney
+10
NOU
Noumea
+11
WLG
Wellington
+12
6
Hide quick links:
Advertisement
