GE Profile P7CEBBS6RBB Manual page 19

Troubleshooting
Problem
Beans" indicator
on but hopper still
contains lots of
Grinder is making
a very loud sharp
noise.
Appliance disposes
grounds without
watery.
Brew unit cannot be
removed.
Disposal Drawer
cannot be removed.
Internal drip tray is
No steam or hot
water is coming out
of the steam wand.
Steam or hot water
have stopped
dispensing
mid-process.
Cause
Internal coffee outlet is blocked.
Beans are too oily and do not slide freely
into the grinder.
completing or power outage during brew
cycle.
Bean container is empty and grind amount
did not meet standards for good strength
Commonly occurs on first brewing cycle.
Brew module is dirty.
Grinder setting is too coarse.
Brew unit not in neutral position.
Disposal Drawer can only be removed
Water tank is empty.
Solution
Clean the coffee grinder shoot. Refer
Stir the beans in the container to allow
them to slide down and avoid using oily
beans if possible.
Stop operations and call service.
next brew.
Remove the brew unit and clean.
a smaller setting during grinding
operation.
coffee settings.
Refill coffee bean container.
wait until function is complete before
removing, Replace service door to
ensure continuous function.
Wait until you hear no more sounds
service door to try and remove again.
Remove the brew module and clean.
function is complete before attempting to
remove the disposal drawer.
are larger.
Stop the cycle, unplug the unit, clear the
steam wand spout using the cleaning
tool as directed.
Refill the water tank to continue process.
Restart the function.
19