Canon REALiS SX7 Mark II Brochure & Specs page 9

LED Input Illumination
When several image input devices are
connected, an LED indicates which
image signal is selected as the input.
The LED illumination on the operation
panel flashes to indicate start-up, end
of presentation and other commands.
WUX4000 D WUX4000 WUX10 Mark II D
WUX10 Mark II SX7 Mark II D SX7 Mark II
SX80 Mark II D SX80 Mark II SX6O SX800
Remote Control Convenience
These flexible remote control features
enable presenters to drive home a
point without ever breaking stride.
WUX4000 D WUX4000 WUX10 Mark II D
WUX10 Mark II SX7 Mark II D SX7 Mark II
SX80 Mark II D SX80 Mark II SX6O SX800 X700
Digital Zoom –
enlarges a selected
single area of the screen, like specific
data in a graph; images can be
enlarged up to 12x.*
*Resolution of
enlarged section
is reduced.
Spot –
highlights
a portion of
the image on
the screen; the
spotlight can be
made larger or
smaller, or it can be moved anywhere
on the screen.
Freeze –
lets you freeze the on-screen
display for pauses in the presentation,
such as changing PC connections or
checking the subsequent image file.
Auto Setup
These smart features make preparing
for a presentation quick and easy.
Just press the Auto Setup button,
X700
and within seconds your input source
is connected, distortion is corrected,
focus is sharpened and color is
balanced.
*The SX800 Auto-Set-up feature does not include
Auto Focus and Auto Screen Color
WUX4000 D WUX4000 WUX10 Mark II D
WUX10 Mark II SX7 Mark II D SX7 Mark II
SX80 Mark II D SX80 Mark II SX6O SX800 X700
Auto Keystone –
automatically
calculates the angle of the projector
and corrects for image distortion.
Vertical (+/- 20°).
Original Adjusted
Auto Screen Color –
automatically
adjusts the color balance according to
the projection surface's color, such as
a green chalkboard.
Without Color Correction With Color Correction
Auto Input –
automatically detects
and identifies the image signal from
the input terminal and selects it
for display.
Auto Focus –
automatically measures
the distance to the screen using an
infrared sensor, and adjusts the focus
in as little as one second.
Direct Power On
All models can be switched
on and off from a central
control terminal without
having to press the buttons
on the unit. This permits
remote operation when the unit is
mounted overhead. When the Direct
Power setting is "on," and power is
introduced, the projector starts up
automatically and is ready to display in
about 20 seconds.
WUX4000 D WUX4000 WUX10 Mark II D
WUX10 Mark II SX7 Mark II D SX7 Mark II
SX80 Mark II D SX80 Mark II SX6O SX800 X700
Guide Functions
All REALiS models display guide
messages in an on-screen window,
providing feedback on invalid
operations and setup tips.
WUX4000 D WUX4000 WUX10 Mark II
WUX10 Mark II D SX7 Mark II D SX7 Mark II
SX80 Mark II D SX80 Mark II SX6O SX800 X700
Off and Go
All REALiS models are equipped with
an internal charging system to run the
fan. This makes it possible to unplug
the projector and pack up and go
immediately after using it, while the
unit continues to cool down.
WUX4000 D WUX4000 WUX10 Mark II D
WUX10 Mark II SX7 Mark II D SX7 Mark II
SX80 Mark II D SX80 Mark II SX6O SX800 X700
Before Auto Focus
After Auto Focus
Guide functions display