Focus And Shoot; Reviewing An Image Right After Shooting - Canon Power Shot SD30 Basic User's Manual

4.

Focus and shoot.

1. Press the shutter button
halfway to focus.
When the camera focuses, the
camera beeps twice and the
indicator lights green.
2. Press the shutter button fully to shoot.
The shutter sound
will play and the
image will record.
The indicator will
blink green while the
image is recorded to
the memory card.

Reviewing an Image Right After Shooting

After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
You can continue to display images regardless of the review duration
setting with the following procedures.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET button while the image is displayed in the LCD
monitor.
To stop displaying the image, press the shutter button halfway.
6
Indicator
You can use this as a shutter button
(See Vertical Shutter Release in the
Advanced Guide (p. 43).)
See Basic Shooting Functions (p. 7).
See the Advanced Guide: Indicator (p. 24).
See the Advanced Guide for the various shooting methods
available.
See the Advanced Guide: Review (p. 31).