In The Playback Mode - Canon Power Shot SD30 Basic User's Manual

1.
Slide the mode switch to
(playback).
The last recorded image will appear in
the LCD monitor.
2.
Use the
play the image you wish to view.
Use the button to move to the previous image and the
button to move the next image.
Holding the button down advances the images more rapidly, but
shows them less clearly.
1.

In the playback mode,

use the
to select an image to
erase ( ) and press
the button (
2.
Confirm that [Erase] is
selected and press the FUNC./SET
button ( ).
To exit instead of erasing, select [Cancel].
Please note that erased images cannot
be recovered. Exercise adequate
caution before erasing an image.
When you place the camera in the camera station, you can
operate the camera with the wireless controller for playing
back or erasing images (p. 24).
Playback
or button to dis-
See the Advanced Guide for the various playback methods
available
Erasing
or button
).
See the Advanced Guide: Erasing All Images (p. 82).
11