Other Manual Flashes - Canon MiniTT1 Owner's Manual

Manual Flash

Other Manual Flashes

Connect the remote FlexTT5's
sync terminal using:
a) the correct PocketWizard flash sync cable for best results.
- or -
b) your flash's original sync cable and a PocketWizard PC
female adapter, part number MPCF (804-605).
Visit the PocketWizard.com Cable Finder for help selecting
the correct flash sync cable. Using a PocketWizard direct cable
is always preferred over an adapter for ultimate reliability.
DO NOT connect a flash to
your FlexTT5. This port is only for triggering a Canon motor drive
and is not designed for the voltages or current found on flashes.
Attempting to connect 2 flashes to the
flash to this port while there is another in the FlexTT5's shoe,
can be dangerous. Different flashes can have very different
sync voltages. Connecting them together could cause
damage to the flashes, and they may not trigger. 2 identical
flashes with known identical sync voltages may work when
connected together, but operation is not guaranteed to be
risk free.
For guaranteed safety and secure triggering, one PocketWizard
per remote flash is recommended. If you need to trigger more
than 1 flash from a single remote FlexTT5, consider setting the
additional flash to use its optical slave.
17
(cont'd)
port to your flash's
port. You could damage
port, or 1
Use for remote manual flash
FlexTT5 mounted with Velcro
& connected to studio flash
®