Vanity with pure white engineer stone top (6 pages)
Summary of Contents for Runfine Etagere RFBW12301
Page 1
Model :RFBW12301 Model :RFBE 12301 Model :RFBG 12301 Etagere Operators’ Manual Manual de Operadora de Etagere Inspect product prior to installation. Contact info@runfinegroups.com prior to returning product to retailer. Inspeccione el producto antes de su instalación. Póngase en contacto con info@runfinegroups.com antes de devolver el producto al vendedor.
PARTS LIST Lista de componentes A. TOP LEFT SIDE PANEL B. TOP RIGHT SIDE PANEL C. TOP PANEL D. BOTTOM PANEL E. FIXED SHELF PANEL F. BACK TOP CROSS BAR G. ADJUSTABLE SHELF PANEL H. LOWER LEFT SIDE PANEL LOWER RIGHT SIDE PANEL J.
Page 3
HARDWARES 1. DOOR KNOB 2PCS 2. DOOR KNOB SCREW 2PCS 3. CAM LOCK NUT & BOLT 25SETS 4. WOOD DOWEL 26PCS 5. SHELF SUPPORTS 4PCS 6. DOOR MAGNET AND SCREW 2SETS 7. WOOD SCREW (12MM L) 25PCS 8. DOOR HINGES & SCREW 4SETS 9.
Page 4
TOOLS REQUIRED (NOT INCLUDED) / HERRAMIENTAS REQUERIDAS (NO INCLUIDO) FLAT HEAD Destornillador de PHILLIPS DESTORNILLADOR SCREWDRIVER cabeza plana SCREWDRIVER PHILLIPS Por favor, lea las instrucciones antes del montaje. Please read instructions before assembly. Realizar el montaje sobre una superficie enmoquetada para Perform assembly on a carpeted surface to prevent scratching.
Page 5
ASSEMBLE TOP SIDE PANELS,FIXED SHELF & BACK TOP CROSS BAR (STEP 1)- #B ARMAR LOS PANELES DE LATERALES SUPERIORES, ESTANTE FIJO Y BARRA TRANSCERSAL SUPERIOR TRASERA. (PASO 1) -- # B Insert wood dowels (4) into the pre-drilled hole of fixed shelf panel (E) & back top cross bar (F), attach fixed shelf panel (E) and back top cross bar (F) to top side panel (A) &...
Page 6
ASSEMBLE TOP PANEL, BOTTOM PANEL AND DOOR MAGNETS(STEP 2) ARMAR LOS PANELES DE LA PARTE SUPERIORES, PANEL INFERIOR Y IMAN DE LA PUERTA. (PASO 2) Attached the top panel (C) to the top side panel (A) & (B) by camlock bolts (3). Insert cam lock bolts (3) into the pre-drilled hole of the bottom panel (D), attach the bottom panel (D) to the top side panels (A) &...
Page 7
ASSEMBLE LOWER SIDE PANEL, LOWER BACK CROSS BAR, FRONT DECORATIVE PANEL (STEP 3) ARMAR EL PANEL INFERIOR, BARRA TRANSVERSAL BAJO Y PANEL FRONTAL DECORATIVO (PASO 3) Attach the lower left side panel (H) & the lower right side panel (I) to the lower back top cross bar (J), the front decorative panel (L) &...
Page 8
SECURE THE TOP AND THE LEG PORTIONS (STEP 4) ASEGURAR LA TAPA Y LAS PARTES DE PATA (PASO 4) Attached the top portion to the leg by inserting the camlock bolts (3) & the wood dowels (4) located on the top side panels and the lower side panels as shown (Figure 9).
Page 9
ASSEMBLE OF THE BACK PANEL(STEP 5) ENSAMBLE DEL PANEL POSTERIOR (PASO 5) Attache the back panel ( N)&(O) to the assembled top portion using the wood screws (7) as shown (Figure 11). Agregado el panel posterior (N) y (O) a la parte superior montado utilizando los tornillos para madera (7) como se muestra (Figura 11).
Page 10
WALL MOUNT INSTALLATION(STEP 7) INSTALACIÓN MONTAJE EN PARED (STEP 7) Locate a desired position on the wall on which to mount the cabinet. If wall studs are located at the exact screw positions of the cabinet cross bars, then mount the cabinet to the wall using mounting screws (9).
Need help?
Do you have a question about the Etagere RFBW12301 and is the answer not in the manual?
Questions and answers