Sony DSC-RX10 Service Manual page 14

3. Gently fold the Flexible Board and insert the 3 Group Lens Frame Block Assy into the Straight Tube Block Assy.
4. Turn the Iris 3-4 Group Lens Frame Block Assy clockwise about 10 degrees to further insert it.
Flexible Board
approx.
Iris 3-4 Group Lens
Frame Block Assy
5. Confirm that the Flexible Board is placed in the concave of the Cam Tube.
6. Match the △ mark on the Straight Tube Block Assy with the fin of Cam Tube.
Fin of Straight
mark
Tube Block Assy
Concave of Cam Tube
7. Install the Thrust Plate.
8. Pull the Flexible Board out of the hole of the Rear Tube Mirror Block Assy and install the Rear Tube Mirror Block Assy with four screws.
Thrust Plate Rear Tube Mirror
Block Assy
DSC-RX10_L2
10
Rib Rib
Flexible Board
Hook
9. Fully turn the Cam tube counterclockwise.
10. Install the 2 Group Lens Frame Block Assy.
11. Install the 1 Group Lens Frame Block Assy and fully turn the gear of the Cam Tube clockwise.
2 Group Lens
Frame Block Assy
Cam Tube
12. Install the Zoom Gear Assy with three screws.
13. Install the FG Retainer.
Zoom Gear Assy
14. Perform the Flange Back Adjustment after the assembling.
1-11E
1 Group Lens
Frame Block Assy
Gear of the Cam Tube
Rib
Rib
Rib
FG Retainer
Hooks